This report is designed to inform you about the quality of water we delivered to you over the past year. Copies will be available at the Hamel Village Hall, 111 S. Old U.S. Rt. 66, Hamel, IL. If you wish to have a copy mailed to you or if​​ you have any questions about this report, please contact the water supply operator, Don Grimm (618) 633-2484, or attend our regularly scheduled meetings, 7:00 p.m. on the second Tuesday of each month at the Village Hall, 111 S. Old U.S. Rt. 66, Hamel, IL.

Hamel purchases water from Bond/Madison Water Company who in turn is supplied by the Illinois American Water Company. This water is piped from the Granite City and East St. Louis Water Treatment Plant which receives water from the Mississippi Rivers. A source water assessment for the Granite City and East St. Louis systems have been completed by the Illinois EPA. If you would like a summary of the information contained in this report, contact Rachel Bretz, Illinois American Water Quality Supervisor at (618)​​ 465-6736 ext. 4. IEPA considers all surface water sources of community water supply to be susceptible to potential pollution problems, hence, the reason for mandatory treatment for all surface water supplies in Illinois. Mandatory treatment includes coagulation, sedimentation, filtration, and disinfection.

SOURCE WATER INFORMATION

Source Water NameType of Water  Report Status

CC 02-METER STAUNTON RD.FF-IL1195280 TP02  SW___________NE IL 140 AND STAUNTON RD METER

CC 03-MASTER METERFF IL0050020 TP01  SW___________

The Granite City distribution system also has an interconnection with the East St. Louis distribution system. Water is routinely supplied to the Granite City system through that connection. To view a summary version of the completed Source Water Assessments you may access the IEPA website at​​ http://www.epa.state.il.us/cgi-bin/wp/swap-fact-sheets.pl.

The Village of Hamel routinely monitors for contaminants in your drinking water according to Federal and State laws. The first table in this report shows the results of Illinois American’s monitoring for the period of January 1st​​ to December 31st, 2018 at their Granite City supply. Because customers may at times receive water​​ from the East St. Louis supply, the second table contains the monitoring information from that distribution system. The third table includes the system monitoring data for the Village of Hamel.

ILLINOIS-AMERICAN WATER QUALITY REPORT (GRANITE CITY)

The​​ next several tables summarize contaminants detected in your drinking water supply.

 

Inorganic Contaminants

Collection Date

MCLG

MCL

Highest Level Detected

Range of Levels Detected

Compliance Achieved

Typical Sources

Fluoride (ppm)​​ 1

2018

4

4

0.8

0.72-0.85

Yes

Water additive that promotes strong teeth

Nitrate (ppm)​​ 2

2018

10

10

3

ND-2.85

Yes

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural

deposits

Sodium (ppm)​​ 3

2018

N/A

N/A

17

16.9-16.9

Yes

Erosion from​​ naturally occurring deposits: Used in water softener regeneration

1​​ Fluoride is added to the water supply to help promote strong teeth. The Illinois Department of Public Health recommends a fluoride level of 0.7 mg/L.

2​​ Nitrate in drinking water at​​ levels above 10 ppm is a health risk for infants less than 6 months of age. High nitrate levels in drinking water can cause blue baby syndrome. Nitrate levels may rise quickly for short periods of time because of rainfall or agricultural activity. If you are caring for an infant you, should ask advice from your health care provider.

3​​ There is no state or federal MCL for sodium. Monitoring is required to provide information to consumers and health​​ officials that are concerned about sodium intake due to dietary precautions. If you are on a sodium-restricted diet, you should consult a physician about this level of sodium in the water.

Turbidity​​ 4

Substance (Units)

Year Sampled

Limit​​ 
(Treatment Technique)

Level Detected

Compliance Achieved

Typical Source

Lowest Monthly % meeting limit

2018

0.3 NTU

100%

Yes

Soil runoff

Highest Single Measurement

2018

1 NTU

0.37 NTU

Yes

Soil runoff

4​​ Turbidity is a measure of the cloudiness of the water caused by suspended particles. We monitor it because it is a good​​ indicator of the effectiveness of our filtration system, water quality, and disinfectants. The treatment technique requires that at least 95% of routine samples are less than or equal to 0.3 NTU, and no sample exceeds 1 NTU. We are reporting the percentage​​ of all readings meeting the standard of 0.3 NTU, plus the single highest reading for the year.

Total Organic Carbon

The percentage of Total Organic Carbon (TOC) removal was measured each month and the system met all TOC removal requirements set,​​ unless a TOC Violation is noted in the violation section.

ILLINOIS-AMERICAN WATER QUALITY REPORT (EAST ST. LOUIS)

The next several tables summarize contaminants detected in your drinking water supply.

 

Inorganic Contaminants

Collection Date

MCLG

MCL

Highest Level Detected

Range of Levels Detected

Compliance Achieved

Typical Sources

Fluoride (ppm)​​ 2

2018

4

4

0.74

0.73-0.74

Yes

Water additive that promotes strong teeth

Manganese (ppb)

2018

150

18

18

17-18

Yes

This contaminant is not currently​​ regulated by the USEPA. However, the state regulates. Erosion of natural deposits.

Nitrate (ppm)​​ 3

2018

10

10

3

ND-2.85

Yes

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural

deposits

Sodium (ppm)​​ 4

2018

N/A

N/A

17

16.9-16.9

Yes

Erosion from naturally occurring deposits: Used in water softener regeneration

Radioactive Contaminants

Collection Date

MCLG

MCL

Highest Level Detected

Range of Levels Detected

Compliance Achieved

Typical Sources

Beta/photon​​ emitters (p/Ci/L)​​ 1

2014

0

50

5

4-5

YES

Decay of natural and man-made deposits

Combined Radium 226/226 (pCi/L)

2016

0

5

1.98

ND-1.98

YES

Erosion of natural deposits.

Synthetic Organic Contaminants

Collection Date

MCLG

MCL

Highest Level Detected

Range of Levels Detected

Compliance Achieved

Typical Sources

Atrazine

2018

3

3

0.6

ND-0.6

YES

Runoff from herbicide used in row crops.

Volatile Organic​​ Contaminants

Collection​​ Date

MCLG

MCL

Highest​​ Level Detected

Range of​​ Levels Detected

Compliance​​ Achieved

Typical Sources

Xylenes

2018

10

10

0.0007

ND-0.007

YES

Discharge from petroleum factories. Discharge from chemical factories.

1​​ The MCL for Beta/photon emitters is written as 4 millirem/year (measured) of rate of​​ radioactive decay). EPA considers 50 pCi/L as the level of concern for beta emitters.

2​​ Fluoride is added to the water supply to help promote strong teeth. The Illinois Department of Public Health recommends a fluoride level of 0.7 mg/L.

3​​ Nitrate in​​ drinking water at levels above 10 ppm is a health risk for infants less than 6 months of age. High nitrate levels in drinking water can cause blue baby syndrome. Nitrate levels may rise quickly for short periods of time because of rainfall or agricultural​​ activity. If you are caring for an infant you, should ask advice from your health care provider.

4​​ There is no state or federal MCL for sodium. Monitoring is required to provide information to consumers and health officials that are concerned about​​ sodium intake due to dietary precautions. If you are on a sodium-restricted diet, you should consult a physician about this level of sodium in the water.

Turbidity​​ 5

Substance (Units)

Year Sampled

Limit​​ 
(Treatment Technique)

Level Detected

Compliance Achieved

Typical Source

Lowest Monthly % meeting limit

2018

0.3 NTU

98%

Yes

Soil runoff

Highest Single Measurement

2018

1 NTU

0.79 NTU

Yes

Soil runoff

5​​ Turbidity is a measure of the cloudiness of the water caused by suspended particles. We monitor it​​ because it is a good indicator of the effectiveness of our filtration system, water quality, and disinfectants. The treatment technique requires that at least 95% of routine samples are less than or equal to 0.3 NTU, and no sample exceeds 1 NTU. We are reporting the percentage of all readings meeting the standard of 0.3 NTU, plus the single highest reading for the year.

Total Organic Carbon

The percentage of Total Organic Carbon (TOC) removal was measured each month and the system met all TOC​​ removal requirements set, unless a TOC Violation is noted in the violation section.

Unregulated Contaminant Monitoring Rule (UCMR4)​​ 6

Contaminant (Units)

Year Sampled

Amount Detected​​ 
(Average)

Range of Detections

Typical Source

2-Methoxyethanol

2018

0.2

ND-0.3

Used in a number of consumer products, such as synthetic cosmetics, perfumes, fragrances, hair preparations and skin lotions

Manganese (ppb)

2018

7

ND-1.1

Naturally-occurring element; commercially available in​​ combination with other elements and minerals; used in steel production, fertilizer, batteries and fireworks; drinking water and wastewater treatment chemical; essential nutrient

Total Haloacetic Acids 9-UCMR4 (ug/L)

2018

28

5.9-24

By-product of drinking water disinfection.

6​​ Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in​​ drinking water and whether future regulations is warranted. A maximum contaminant level (MCL) for these substances has not been established by either state or federal regulations, nor has mandatory health effects language.

VILLAGE OF HAMEL WATER REPORT

Regulated Substances

 

Date Sampled

UG/L

Action​​ 
Level (AL)

90th​​ Percentile

# Sites Over AL

Units

Violation

Likely Source of Contamination

Copper

2016

820

1.3

0.743

0

ppm

No

Corrosion of household plumbing systems; erosion of​​ 
natural deposits;​​ leaching from wood preservatives.

Compliance with the Lead and Copper Rule (LCR) is determined by the levels of lead and copper found in samples taken from customers’ taps. LCR requirements are met if the 90th​​ percentile of all samples taken does not​​ exceed the action level of 15 ppb for lead or 1.300 ppm for copper.

Infants and young children are typically more vulnerable to lead in drinking water than the general population. It is possible that lead levels at your home may be higher than at other homes in the community as a result of materials used in your home’s plumbing. If you are concerned about elevated levels of lead in your home’s water, you may wish to have your water tested and flush your tap for 30 seconds to two minutes before using tap water. Additional information is available from the EPA’s Safe Drinking Water hotline 800-426-4791.

Disinfections/Disinfectant By-Products

Disinfectants and Disinfection​​ 
By-Products

Collection Date

Highest Level Detected

Range of Level Detected

MCLG

MCL

Units

Violation

Likely Source of Contamination

HAA5- Total Haloacetic Acids

2018

11.0

0-21.7

No Goal for Total

60

Ppb

No

By-products of drinking water disinfection

TTHM- Total Trihalomethanes

2018

44.0

24.5-62.6

No Goal for Total

80

Ppb

No

By-product of drinking water disinfection

Chloramines

2018

1.0

0.11-1.7

MRDLG=4

MRDL=4

Ppm

No

Water additive used to control microbes

* Chlorine and chloramines are disinfecting agents added to control microbes that otherwise could cause​​ waterborne diseases or other water quality concerns. Most water systems in Illinois are required by law to add either chlorine or chloramines. Levels well in excess of the MRDL could cause irritation of the eyes or nose in some people. The values reported​​ reflect multiple locations in the service area. Chloramines are a disinfectant made from combining chlorine and ammonia.

Violations Table

CONSUMER CONFIDENCE RULE

Violation Type

Violation Begin

Violation End

Violation Explanation

CCR Adequacy/
Availability/Content

07/01/18

11/01/18

We failed to provide to you, our drinking water customers, an annual report that adequately informed you about the correct regulated contamination of our drinking water.

 

DEFINITION OF TERMS

LEAD

If present,​​ elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We cannot control the variety of​​ materials used in plumbing components. When your water has been sitting around for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about​​ lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline 800-426-4791 or at http://www.epa.gov/safewater/lead.​​ 

CRYPTOSPORIDIUM

Cryptosporidium​​ is a protozoan found in untreated surface waters through the United States (the organism is generally not present in a ground water source). Although filtration removes Cryptosporidium, the most commonly​​ used filtration methods cannot guarantee 100% removal. Ingestion of Cryptosporidium may cause cryptosporidiosis, an abdominal infection. Symptoms of infection include nausea, diarrhea, and abdominal cramps. Most healthy individuals can overcome the disease within a few weeks. However, people with severely weakened immune systems have a risk of developing life-threatening illness. We encourage such people to consult their doctors regarding appropriate precautions to take to avoid infection. Cryptosporidium​​ must be ingested to cause disease, and it is spread through means other than drinking water.

USEPA issued a new rule in 2006 that requires systems with higher Cryptosporidium levels in their source water to provide additional treatment.

In 2015, our​​ monitoring of the Mississippi River raw untreated water indicated the presence of this organism. The Mississippi River cryptosporidium levels ranged from not detected to 0.698 oocysts/L, with an average of 0.079 oocysts/L. Although this organism is present, it is at levels low enough that no supplemental treatment is required by our facility per USEPA standards.

Non-Detects (ND) -​​ laboratory analysis indicates that the contaminant is not present. Parts per million (ppm) or Milligrams per liter (mg/l)​​ - one​​ part per million corresponds to one minute in two years or a single penny in $10,000. Parts per billion (ppb) or Micrograms per liter- one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000. Picocuries per liter (pCi/L)​​ - Picocuries per liter is a measure of the radioactivity in water. Millirems per year (mrem/yr)​​ - measure of radiation absorbed by the body.​​ Nephelometric Turbidity Unit (NTU)​​ - nephelometric turbidity unit is a measure of the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.​​ Action Level (AL)​​ - the concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.​​ Treatment Technique (TT) -​​ A​​ treatment technique is a required process intended to reduce the level of a contaminant in drinking water. Maximum Contaminant Level-​​ The “Maximum Allowed” (MCL) is the highest level of a contaminant that is allowed in drinking water. MCLs are set as close​​ to the MCLGs as feasible using the best available treatment technology.​​ Maximum Contaminant Level Goal- The “Goal” (MCLG) is the level of a contaminant in drinking water below which there is no know or expected risk to health. MCLGs allow for a margin of​​ safety.​​ Maximum Residual Disinfectant Level- the MRDL is the highest level of disinfectant routinely allowed in drinking water. Addition of a disinfectant is necessary for control of microbial contaminants.​​ Maximum Residual Disinfectant Level Goal- The level of drinking water disinfectant below which there is no known or expected risk to health.

As you can see by the table there were no violations. Your drinking water meets or exceeds all Federal and State requirements. “All sources of drinking water are subject to potential contamination by contaminants that are naturally occurring or are manmade. Those contaminants can be microbes, organic or inorganic chemicals, or radioactive materials” All drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that the water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline at 1-800-426-4791.

MCL’s are set at very stringent levels. To understand the possible health effects described for many regulated contaminants, a person would have to drink 2 liters of water every day at the MCL level for a lifetime to have a one-in- a-million chance of having the described health effect.

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or another immune system disorders, some elderly, and infants can be particularly at risk form infections. These people should seek advice about drinking water​​ from their healthcare providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by cryptosporidium and other microbiological contaminants are available from the Safe Drinking Water Hotline.